Request a quote
Resources

Selection guide & technical notes

The questions that decide a configuration — answered without marketing language.

Home / Resources
Quick selection

Match the specimen to the platform

If you inspect…Start withWhy
12-inch wafers, photomasks, panelsSTMT12-BD356 × 305 mm travel; 12 MP documentation camera; motorised turret option
8-inch wafers, 200 mm framesSTMT80-BD210 × 210 mm travel in a bench-sized footprint
6-inch wafers, MEMS, compound semiSTMT60-BD158 × 158 mm travel; erect image for recipe consistency
Polished mounts, coatings, DIC workSTMT40-BDBF / DF / POL / DIC from one illuminator; 6″ × 4″ stage
Heavy or irregular partsSTME500Inverted stand — specimen sits on the stage, no height limit
Inclusions and fine scratchesSTME700Bright/dark-field switching unit in the stand
Accredited lab, highest resolutionSTRX63MCFI60 TU Plan Fluor BD objectives, WD 18 mm at 5×
Minerals, crystals, polymersSTCX43P160 mm rotating stage, 6′ accuracy, Bertrand lens
Opaque ores + thin sectionsSTCX43MPTransmitted polarizing plus reflected bright field
FAQ

Common technical questions

Upright or inverted — which should I buy?

Choose inverted when specimens are heavy, irregular or taller than the stage opening, or when you want to place a polished mount directly on the stage without clamping. Choose upright when you need maximum optical flexibility (transmitted light, polarizing accessories, DIC) or work mostly with thin sections and small mounts.

How much stage travel do I need for a 12-inch wafer?

At least 356 mm in X and 305 mm in Y to reach the full surface without re-chucking — that is the STMT12-BD table (710 × 420 mm). For 8-inch wafers, 210 × 210 mm is sufficient (STMT80-BD); for 6-inch, 158 × 158 mm (STMT60-BD).

Do I need dark field for inclusion rating?

Yes, for non-metallic inclusions and fine surface defects. Dark field renders low-contrast scatterers bright against a dark background, which is how inclusion rating to ISO 4967 / ASTM E45 is normally performed. A bright-field-only stand will under-report.

What does a coded turret actually do?

It tells the software which objective is in the light path, so the measurement calibration changes automatically when the objective changes. Without it, an operator can measure with the wrong scale — the most common error in metallographic reporting.

Can the microscope be delivered with a camera and measurement software?

Yes. The wafer and research platforms ship with a 12 MP industrial camera, a brand PC and monitor, and ST-1.5D measurement software including stitching and extended depth of focus. The inverted models are supplied with C-mount ports for 5–20 MP cameras and the matching software suites.

Do you offer OEM or private-label configurations?

Yes — mechanical configuration, silkscreen, packaging and software branding can be adapted for volume orders. Send your requirement and expected annual quantity for an OEM quotation.

Further reading

Technical articles